This way, you can get a spackling paste of the best consistency for your project. Step By Step Processįor our money, the best bet is always to take the dry mix and make your own at home, in the comfort of your backyard. Using a paint roller, apply the primer smoothly and evenly. This will ensure the spackle adheres correctly to the wall surface. For the best results, sand down the area to remove the paint and clean it thoroughly.īefore you spackle your walls, make sure to apply a primer. While you can spackle over paint, it is difficult to make these repairs particularly smooth. Using very fine grit sandpaper, lightly sand through any layer of paint that is present. Go over surfaces with a cloth and remove any particles. You must ensure the surface of your walls is perfectly clean before you apply spackle. We prefer one with a lid that can be closed, as spackling paste dries quickly.
While you can use an orbital sander, we like the control that a sanding block and good old-fashioned elbow grease give you. Then, finer grits (200-400) are used to finish the surface. This will prepare the wall to be spackled.
The drill with a mixer attachment will quickly and efficiently mix your spackle to a smooth and even consistency, eliminating clumps. Spackle is usually sold as a dry mix to which water is added.
How to spackle walls? First, you’ll need those: In order to properly repair drywall or plaster walls with spackle, you will need the proper tools. The result is a perfectly smooth, even wall. Then, after matching the wall texture and smoothness, you can paint over the spot you’ve fixed. But, it is best to lightly sand down the paint and apply primer before spackling. You can spackle over paint as long as you have paint of the same color at your disposal. Add a fresh coat of paint on top of the spackle, and your walls will look pristine and flawless again. If you are wondering how to use spackle, how to spackle drywall, or how to apply spackling paste, we’ve got good news – it’s not difficult. When fixing small dings, cracks, or screw holes in a wall,spackle and a putty knife are usually used to bring the wall back to a smooth, even surface.